fora1
![](images/star2.gif) ![](images/star2.gif)
发贴: 217
|
2008-12-20 15:04
![收藏这篇帖子](http://abbs.cn/images/icons/icon_favorite.gif)
Case Study 3 非典型parametric system
经典的parametric system很容易被用到泛滥,比如voronoi,虽然本身有它的优点,而且也可以衍生出不少的分支,但是还是会丧失原创性,而且从某种角度看这些经典的parametric system对于建筑师设计还是有很大限制的。
其实在parametric design中更多的是非典型的parametric system,而我认为非典型的parametirc system更加贴近parametric design的真正意义----拓展建筑师的自由。Frank Gehry上世纪80年代要在日本做一条“鱼”,寻遍各种软件,最终找到了工业设计领域的CATIA,借用CATIA的parametric本性。这也可以算是parametric design在建筑设计中的开始吧。所以从最开始parametric软件就是来实现建筑师那些非理性的想法的,即使你的设计结构上再不合理,就象Frank Gehry揉一团纸,parametric软件也可以从头到尾将这团纸变成建筑。很讽刺的是今天parametric design却很大程度被看作是建筑向理性的回归,希望建筑中所有的东西都要有理有据,最好还有个公式控制。
非典型的parametric system这个题目太大,讲起来也就更随意一些,看到什么project就说什么。
Example 3.1 DRL10 Pavilion(cspace)
DRL10 Pavilion是AA的为了庆祝DRL10周年而做的一个installation,先举办了一个小竞赛,然后选出了获胜作品建成实物。
进入决赛的一些作品
![](http://abbs.cn/pic/2008/12/20/1229749958.jpg)
![](http://abbs.cn/pic/2008/12/20/1229749978.jpg)
![](http://abbs.cn/pic/2008/12/20/1229749993.jpg)
![](http://abbs.cn/pic/2008/12/20/1229750002.jpg)
最终胜出者
![](http://abbs.cn/pic/2008/12/20/1229750127.jpg)
从设计开始到最终成品是需要一个过程的,即使是有parametric工具,也无法一步到位。这是最初设计竞赛阶段的构造细节diagram,可以看出和最终还是有差距的。
![](http://abbs.cn/pic/2008/12/20/1229750431.jpg)
![](http://abbs.cn/pic/2008/12/20/1229750439.jpg)
![](http://abbs.cn/pic/2008/12/20/1229750463.jpg) 设想的建造过程
![](http://abbs.cn/pic/2008/12/20/1229750455.jpg)
电脑中的模型(Rhino+Script),结构分为 横向
![](http://abbs.cn/pic/2008/12/20/1229750803.jpg)
纵向
![](http://abbs.cn/pic/2008/12/20/1229750885.jpg)
相交
![](http://abbs.cn/pic/2008/12/20/1229750928.jpg)
座椅,这算是初级阶段的模型,这部分的结构似乎还没有完成
![](http://abbs.cn/pic/2008/12/20/1229750998.jpg)
3d print模型
![](http://abbs.cn/pic/2008/12/20/1229751405.jpg)
![](http://abbs.cn/pic/2008/12/20/1229751422.jpg)
小组成员摆拍
![](http://abbs.cn/pic/2008/12/20/1229751484.jpg)
电脑模型继续细化,任然没有座椅部分的细节
![](http://abbs.cn/pic/2008/12/20/1229751660.jpg)
![](http://abbs.cn/pic/2008/12/20/1229751671.jpg)
![](http://abbs.cn/pic/2008/12/20/1229751689.jpg)
![](http://abbs.cn/pic/2008/12/20/1229751714.jpg)
![](http://abbs.cn/pic/2008/12/20/1229751760.jpg)
AKT似乎是小组的结构合作伙伴(AKT的网站很帅http://www.akt-uk.com/,公司也很厉害),他们决定使用叫做fibre-c的材料,材料基本尺寸是 3.6m x 1.2m ,但是最终他们选择了5m x 1.2m的fibre-c,虽然这样重量超过了UK的手动抬高限制,但是结构上更强,所以他们开始看如何把他们的结构构件lay out在5m x 1.2m的模版上
![](http://abbs.cn/pic/2008/12/20/1229752445.jpg)
计算出每个节点的角度
![](http://abbs.cn/pic/2008/12/20/1229752464.jpg)
座椅部分还是没有进展
![](http://abbs.cn/pic/2008/12/20/1229752486.jpg)
![](http://abbs.cn/pic/2008/12/20/1229752507.jpg)
关于材料, fibreC是一种混凝土加强的玻璃纤维,结合了混凝土和玻璃纤维各自的优点(抗压,抗拉)
![](http://abbs.cn/pic/2008/12/20/1229753248.jpg)
结构小样
![](http://abbs.cn/pic/2008/12/20/1229753287.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753306.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753326.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753361.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753414.jpg)
椅子终于有了进展
![](http://abbs.cn/pic/2008/12/20/1229753630.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753646.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753683.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753702.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753724.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753740.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754091.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754108.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754127.jpg)
一些连接的节点
![](http://abbs.cn/pic/2008/12/20/1229753856.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753877.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753895.jpg)
![](http://abbs.cn/pic/2008/12/20/1229753914.jpg)
根据AKT回馈的FEM测试的结果,作出下列更改
1. 减低最高点到15度. We also lose some of the dynamic formal movement and drama of the structure.
2. 给侧面的结构增加跟多连接. This could be done by infilling flat sheets of fibre-c stiffeners between profiles at various locations. This could also detract from the visual and structural purity of the pavilion.
3. 增加跟多的主要结构构件. This might alter the visual effect of the moire pattern, but could also be interesting if done as a gradient of spacing. I also find it interesting to architecturally express where the structure is performing the most.
4. 加厚材料13mm, and decrease thickness of material at secondary profiles to 10mm (reducing the self-load).
![](http://abbs.cn/pic/2008/12/20/1229754589.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754609.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754647.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754677.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754714.jpg)
结构小样制作,CNC切割
![](http://abbs.cn/pic/2008/12/20/1229754961.jpg)
![](http://abbs.cn/pic/2008/12/20/1229754974.jpg)
组装
![](http://abbs.cn/pic/2008/12/20/1229755083.jpg)
终于的,9步来组装一个AA DRL10 Pavilion
1
![](http://abbs.cn/pic/2008/12/20/1229755429.jpg)
2
![](http://abbs.cn/pic/2008/12/20/1229755439.jpg)
3
![](http://abbs.cn/pic/2008/12/20/1229755455.jpg)
4
![](http://abbs.cn/pic/2008/12/20/1229755493.jpg)
5
![](http://abbs.cn/pic/2008/12/20/1229755508.jpg)
6
![](http://abbs.cn/pic/2008/12/20/1229755528.jpg)
7
![](http://abbs.cn/pic/2008/12/20/1229755553.jpg)
8
![](http://abbs.cn/pic/2008/12/20/1229755575.jpg)
9
![](http://abbs.cn/pic/2008/12/20/1229755585.jpg)
实际建造
![](http://abbs.cn/pic/2008/12/20/1229756138.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756166.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756185.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756197.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756221.jpg)
被强迫劳动的大一新生
![](http://abbs.cn/pic/2008/12/20/1229756250.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756280.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756315.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756344.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756472.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756525.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756542.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756565.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756593.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756617.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756639.jpg)
![](http://abbs.cn/pic/2008/12/20/1229756658.jpg)
哈
|